Texas Site Plans & Permit Drawings
Site plans, residential and commercial permit drawings, metal-building packages, structural coordination and permit-revision support for projects across Texas.
Clear Scope
Fast Turnaround
Permit SupportTexas Permit Drawings Built Around the Local Jurisdiction
Texas permit requirements vary widely by city, county and project type. A metal building in one jurisdiction may need a very different site, foundation and structural package than an addition or commercial improvement in another. We start with the address, identify the local review environment and organize the site, architectural, structural, MEP and correction work around the project.
Texas Permit & Jurisdiction Context
Texas permit requirements can vary substantially by municipality, county and project type. Local authorities commonly administer zoning, setbacks, site planning, development requirements and building-permit procedures.
Permit requirements are local.
The state establishes part of the regulatory framework, but the city, county or other authority having jurisdiction determines the actual submission process, zoning review, local amendments and required permit documents.
SEND YOUR PROJECT ADDRESS →Texas Permit Drawing Services
Use one discipline or coordinate several into a complete permit package.
Site Plans & Plot Plans
Property lines, existing conditions, proposed work, setbacks, access and permit-relevant site information.
Residential Permit Drawings
Additions, ADUs, garages, decks, patio covers, remodels, sheds, pools and accessory structures.
Commercial Permit Drawings
Tenant improvements, change of use, parking, ADA, life safety and commercial alterations.
Architectural Drawings
Floor plans, elevations, roof plans, sections, details and as-built documentation.
Structural Plans & Calculations
Foundation, framing, beams, posts, connections and structural calculations.
MEP Permit Drawings
Electrical, plumbing and HVAC plans for residential and commercial projects.
Grading, Drainage & Civil
Grading, drainage, stormwater, parking and site-development coordination.
PE / Engineering Coordination
Licensed professional review and signed/sealed coordination where required and available.
Permit Corrections & Resubmittals
Plan-review comments, redlines and applicable drawing revisions for resubmittal.
More Ways We Can Help
Choose the project type that best matches what you are planning.
Typical Permit Drawing Deliverables
The exact set depends on the project and reviewing jurisdiction. A coordinated package may include:
Projects We Support in Texas
Homeowners and contractors usually start with the project type—not the discipline name. We organize the drawing scope around what you are actually building.
Popular Texas Service Areas
We support projects statewide. These are some of the most frequently requested locations.
STATEWIDE COUNTY COVERAGE View All 254 Texas Counties
Information That Helps Us Review a Texas Project
Start with the property address and proposed work. The items below help us define the scope more accurately and reduce avoidable back-and-forth.
- Property address, city, county and ZIP
- Survey, plat or available property information
- Zoning / setback information from the local jurisdiction
- Existing and proposed building dimensions
- Site access, parking and drainage information where applicable
- Structural loading / foundation information where required
- Existing-condition photos and dimensions
- Permit comments if the project is already under review
A Clear Permit-Drawing Process
Send the Address
Provide the property address and proposed project.
Share Documents
Survey, plans, photos, sketches and permit comments if available.
Scope Review
We identify the likely drawings and clarify missing information.
Quote & Production
You receive the scope, price, turnaround and drawing production plan.
Client Review
Verify the project information before final delivery.
Permit Support
Send reviewer comments back for applicable revisions.
Built for Permit Review, Not Just Presentation
Clear documentation, coordinated disciplines, remote project support and revision assistance for homeowners, contractors, builders and commercial clients.
Typical Texas Project Pricing
Pricing depends on project complexity, the authority having jurisdiction and the disciplines required. These are starting reference points only.
Site / Plot Plan
From $100Simple permit-focused site plan using available property information.
REQUEST PRICINGPermit Drawing Package
From $250More detailed site plan or small residential permit-drawing scope.
REVIEW MY PROJECTCoordinated Permit Set
From $500Multi-sheet or multi-discipline package based on actual project scope.
GET A CUSTOM QUOTEStructural calculations, MEP, civil, commercial work and PE review are quoted after scope review. Ask about current discounts for eligible projects and repeat clients.
Clear Drawings, Coordinated Disciplines and Professional Review When Required
Site Plans Online USA is a Site Plans LLC brand supporting homeowners, contractors, builders, developers and commercial clients nationwide. Our production workflow is engineering-led, and licensed professional engineering review can be coordinated for eligible projects where required and included in the agreed scope.
See What Clients Say Before You Start
Review our connected profiles, completed projects and permit-drawing examples before deciding how you want to proceed.
Texas Permit Drawing Case Studies
See examples of the types of residential and commercial permit challenges our team works on.
Commercial Parking Expansion — ADA · Houston · Harris County
Houston, TX 77056 (Galleria area) County: City of Houston · Harris County Project: Retail Strip Center — Parking…
VIEW CASE STUDY →
378 SF Covered Breezeway Structural and Roof Plans in New Smyrna Beach, Florida
Coordinating a 42 × 9-foot covered breezeway between an existing metal building and casita, including building offsets, floor…
VIEW CASE STUDY →
Screened Porch Site Plan, Coverage and Drainage in Tampa, Florida
Preparing site-related permit documentation for an approximately 430 SF screened porch on an extensively developed 5,000 SF residential…
VIEW CASE STUDY →
390 SF Wood-Framed Covered Porch Addition in Savannah, Georgia
Designing a new 30 × 13-foot wood-framed lean-to covered porch at an existing two-story residence while addressing roof…
VIEW CASE STUDY →
Garage Conversion + PE Stamp · Los Angeles · LADBS
Los Angeles, CA 90025 (West LA) County: City of Los Angeles · LADBS Project: Garage to ADU —…
VIEW CASE STUDY →
Pool + ADU — Dual Permit · Lakeland · Polk County
Lakeland, FL 33812 County: Polk County Building Department Project: Pool (14×28) + Detached ADU (700 sq ft) —…
VIEW CASE STUDY →Texas Permit Planning Resources
Helpful guides covering site plans, permit requirements, structural coordination, common review issues and project-specific drawing needs.
Do Permit Drawings Need an Engineer or Architect?
You’re planning a home addition, detached garage, deck, or commercial renovation. Your contractor says the building department needs…
READ GUIDE →
Deck Permit Drawings: Footings, Posts, Beams, Joists, Guards & Site Plan
Planning a new backyard deck is exciting until the building department asks for construction drawings. You may know…
READ GUIDE →
Metal Building Permit Plans: Manufacturer Drawings Are Usually Not the Whole Permit Set
You purchased a prefabricated metal building, received a set of drawings from the manufacturer, and submitted them to…
READ GUIDE →
What Drawings Do I Need for a Detached Garage Permit?
Building a detached garage involves more than choosing its size, location, and roof style. Before construction begins, your…
READ GUIDE →
ADU Permit Drawing Checklist: Site, Architectural, Structural, MEP & Energy
Building an accessory dwelling unit (ADU) can create additional living space, support multigenerational housing, or provide rental opportunities.…
READ GUIDE →
Permit Drawings for Work Already Built: The Complete After-the-Fact Permit Guide
You finished a home addition, converted your garage, built a deck, or remodeled a property without getting a…
READ GUIDE →
Texas Metal Building Permit Plans: Manufacturer Drawings, Foundation, Wind & MEP | Complete Guide
Texas metal building permit plans require more than simply purchasing an engineered steel package. That is one of…
READ GUIDE →
How to Calculate Lot Coverage for a Building Permit
Before planning a home addition, garage, swimming pool, patio, or accessory dwelling unit (ADU), one important question needs…
READ GUIDE →
HVHZ Permit Requirements: Miami-Dade and Broward — The Complete 2026 Guide Focus
Two counties in the entire United States carry the HVHZ designation. Both of them are in Florida. Miami-Dade…
READ GUIDE →
Houston Pool Permit Site Plan Requirements (Harris County) – Complete Guide 2026
Adding a pool sounds like a straightforward backyard upgrade until your contractor asks for a site plan, and…
READ GUIDE →Tell Us About Your Texas Project
You do not need to know the technical name of every drawing. Send the address, city/county and what you plan to build or change. We’ll review the information and identify the likely next step.
Texas Permit Drawing FAQs
Quick answers to the questions we hear most often before a project starts.
Do you provide Texas site plans for permits?
Yes. We prepare permit-focused site and plot plans for residential and commercial projects across Texas, based on the project information and local review requirements available for the property.
Do you work throughout all 254 counties?
We support projects statewide. The exact permit process and required drawings depend on the city, county or other authority having jurisdiction.
Do you need to visit the property?
Most projects can be coordinated remotely using surveys, existing plans, photos, sketches, public property information and client-supplied measurements. Some scopes may require field verification or professional surveying.
Can you prepare structural or MEP drawings?
Yes. Structural, electrical, plumbing and HVAC drawing coordination is available where the project scope requires it.
Can you coordinate a PE stamp?
Professional engineering review and signed/sealed documents can be coordinated where required, available and included in the agreed scope.
Can you help after permit comments are issued?
Yes. Send the complete review comments and the latest drawing set. We can evaluate the comments and prepare applicable revisions within the agreed project scope.
How much do Texas permit drawings cost?
Simple site plans may begin around our basic site-plan pricing, while full permit sets, structural, MEP and commercial projects are quoted after scope review.
What do you need to start?
Send the property address, project description and any available survey, photos, sketches, existing plans, product information or permit comments.
Need a Site Plan or Permit Drawing Package?
Send us the property address and project details. We’ll help identify the next step.
Site Plans & Permit Drawings Across All 254 Texas Counties
Choose your county to view local permit-drawing support, core services, project types, county-seat information and the documents that may be needed for your project.
Send Us the Property Address
We’ll review the location and help identify the appropriate drawing scope and next step.